Baxi DUO-TEC COMPACT страница 20 Скачать руководство пользователя

Страница: 20 / 76

7710400 (01-06/18)

INST

ALLER Section

(en)

19.4 REPLACEMENT OF PARTS

If one or more of the following components are replaced:

•

Water-fumes exchanger

•

Fan

•

Gas valve

•

Gas nozzle

• Burner

•

Flame sensing electrode

perform the Automatic Calibration procedure described below, then check and adjust the CO

% value as indicated in the section

“

COMBUSTION ADJUSTMENT FUNCTION (CO

% )

”.

When working on the appliance, check the condition and position of the flame sensing electrode and replace it if necessary.

AUTOMATIC CALIBRATION FUNCTION

Press

and

together and hold down for at least 6 seconds. When the display indicates "

" press

(within 3 seconds

after pressing the previous buttons).

If the display indicates "

303

" the Automatic Calibration function has not been activated. Disconnect the boiler from the mains

power supply for a few seconds and repeat the procedure.

When the function is enabled, and

flash on the display

After the ignition sequence, which can also take place after a few attempts, the boiler performs three operations (each lasting

approximately 1 minute) going first to maximum power, then to ignition power and lastly to minimum power. Before moving on to

the following phase (from maximum power to ignition power and then to minimum power), and appear on the display.During

this phase, the power level reached by the boiler and the delivery temperature alternate on the display.

When

and

flash together on the display, the calibration function has terminated.

Press

to leave the function. The display shows

ESC

Содержание DUO-TEC COMPACT













































































Результаты поиска

Содержание DUO-TEC COMPACT

Отзывы:

Похожие инструкции для DUO-TEC COMPACT

Бренды по названию

Популярные бренды

Baxi DUO-TEC COMPACT, Инструкция для пользователей и установщиков

Результаты поиска

Содержание DUO-TEC COMPACT

Отзывы:

Похожие инструкции для DUO-TEC COMPACT

Бренды по названию

Популярные бренды