Chic fascia only.
1.
Supplied in the fascia
pack are two tubular trim
sets. The lower trim set has
a flat plate fitted to the rear.
Hang the upper and lower
trim sets as in figure 15.
2.
The lower section of the
fascia is secured with
magnets. Locate it as in
figure 16.
Mirage fascia only.
1.
Supplied in the fascia pack is a three bar
trim. Hang this at the bottom of the fascia
(See figure 15).
2.
The lower section of the fascia is secured
with magnets. Locate it as in figure 16.
3.
Supplied in the fascia pack is a canopy
trim. Hang this at the top of the fascia (See
figure 17).
Page 13
INSTALLER AND OWNER GUIDE
©
Baxi Heating U.K. Limited 2006.
Figure 17. Fitting the canopy trim (Shown
with ‘Mirage’ fascia)
Figure 16. Fitting the lower section to
the ‘Chic’ and ‘Mirage’ fascia.
Figure 15. Fitting the hanging trims
Figure 14. Securing the fascia.
