Baxi 807 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 17

Baxi 807 Скачать руководство пользователя страница 4

!

Use gloves to provide additional grip.

!

Always use assistance if required.

Always

!

Always

install the heater in accordance with this guide. If in doubt obtain

expert advice.

!

Always

make sure the electrical socket is accessible and located adjacent to, but

not above the heater.

!

Always

disconnect the heater from the electrical supply before carrying out

cleaning, maintenance or replacing the light bulb.

!

Always

make sure the heater is firmly secured to prevent it from being tipped over.

!

Always

use a fireguard when young children and infirm persons can come into

contact with the heater.

!

Always

use genuine Baxi Fires Division spares.

Never

!

Never

leave children unsupervised in a room where the heater is ON and

unguarded.

!

Never

obstruct or cover the fan outlet or force items into heater openings.

!

Never

install or use the heater anywhere where water is in use, i.e.

Bathrooms, Kitchens, Shower Rooms, Swimming Pools etc.

!

Never

use aerosols or steam cleaners on or around the heater.

!

Never

route the mains supply cable under carpet etc.

!

Never

install the heater close to curtains or combustible materials.

!

Never

use the heater to dry clothes etc.

!

Never

sit or stand on the heater.

FITTING THE HEATER

The installation of this heater requires a reasonable level of DIY skills.
Please read this guide thoroughly before commencing installation and if in doubt,
seek help from a competent person

Do I need any tools?

1. You will need two screwdrivers: -

1 off Pozidrive / Phillips / cross head

screwdriver. This should have a number 2 size

end. If you are unsure about the size of the end simply make sure that the end fits into
the screws supplied with the heater. If the end is too small then the end will spin and
damage the screw.

1 off Flat end

screwdriver. The end should fit into the slot head screws supplied with

Page 4

INSTALLER AND OWNER GUIDE

«
...
2
3
4
5
6
...
»

Содержание 807


















Отзывы:

Нет отзывов