background image

1  Safety

1.2 

Recommendations

Caution

Only qualified professionals are authorised to work on the boiler 

and the installation.

The appliance has an integral frost protection mode as long as 

there is power to the boiler.

Important

Regularly check the water pressure in the system 

(recommended pressure is 1.5 bar).

Keep the appliance accessible at all times.

Do not remove or cover the user information and serial number 

labels affixed to the boiler control flap. They must remain legible 

throughout the lifetime of the boiler.

1.2.1 

The Benchmark Scheme

Baxi Heating UK Ltd is a licensed member of the Benchmark Scheme 

which aims to improve the standards of installation and commissioning of 

domestic heating and hot water systems in the UK and to encourage 

regular servicing to optimise safety, efficiency and performance.
Benchmark is managed and promoted by Heating and Hotwater Industry 

Council. For more information visit www.centralheating.co.uk

1.2.2 

Benchmark Commissioning Checklist

Please ensure that the installer has fully completed the Benchmark 

Checklist on the inside back pages of the installation instructions supplied 

with the product and that you have signed it to say that you have received 

a full and clear explanation of its operation. The installer is legally required 

to complete a commissioning checklist as a means of complying with the 

appropriate Building Regulations (England and Wales).
All installations must be notified, by the installer, to Local Area Building 

Control either directly or through a Competent Persons Scheme. A 

Building Regulations Compliance Certificate will then be issued to the 

customer who should, on receipt, write the Notification Number on the 

Benchmark Checklist.
This product should be serviced annually to optimise its safety, efficiency 

and performance. The service engineer should complete the relevant 

section of the Benchmark Service Record in the Installation & Service 

manual after each service.
The completed Benchmark Checklist & proof of annual servicing (where 

applicable) will be required in the event of any warranty work.

400 Combi 2

Содержание 430 Combi 2





































Отзывы: