REPLACING THE RADIANTS
(See figure 4).
Always use the correct type of replacement radiant. Ask for Baxi Fires Division
part number 5110472.
Turn the fire off and allow it to cool before attempting to remove the radiants
.
!
Remove the dress guard by pressing down the two hooks at the top. Tilt the guard
forward and lift out.
!
Lift the radiant upward to clear the metal retaining bar then pull out bottom first.
!
Fit the new radiant by inserting its top under the top lip of the radiant box then
swing the bottom of the radiant over and behind the retaining bar.
It is important that
that the rear face of the radiants rest against the horizontal ribs in the rear panel.
There will be a small gap between their bottom front edges and the retaining
channel at the front of the radiant box.
!
Replace the dress guard. Locate the bottom of the dress guard in the two holes in the
bottom panel apron. Push the guard back so that the two spring projections at the top of
the guard engage in the slots under the front decorative canopy.
Page 9
OWNER GUIDE
©
Baxi Heating U.K. Limited 2006.
Figure 4. Replacing radiant(s)
