Bavaria 3400126, Оригинальная инструкция по эксплуатации

Страница: 24 / 44

GB
- 24 -
bed in the manufacturer’s instructions. Make
sure that your feet are far enough away from
the mower blade!
l) The lawn mower should not be tilted when the
motor is switch on unless it has to be raised
for starting purposes. In this case, tilt it as little
as absolutely necessary and only raise the
side opposite to that of the user.
m) Do not switch on the mower if you are positi-
oned in front of the chute.
n) Never move your hands or feet toward or un-
der any rotating parts. Keep clear of the chute
opening at all times.
o) Never lift or carry a lawn mower with the engi-
ne running.
p) Switch o ff the motor and pull the plug out of
the socket. Make sure that all moving parts
have reached a complete standstill:
- before you dislodge any blockages or clogs
in the chute.
- before carrying out any checks, cleaning,
maintenance or other work on the lawn mo-
wer.
- if you have struck a foreign object. Examine
the mower for signs of damage and carry out
any necessary repairs before restarting and
continuing to work with the mower.
- if the lawn mower begins to experience
exceptionally strong vibrations, immediately
switch it o ff and check it.
- Search for damage.
- Repair the damaged parts as required.
- Make sure that all nuts, bolts and screws are
fastened securely.
q) Switch o ff the mower and pull the plug whe-
never you leave the mower.
Maintenance and storage
a) Make sure that all nuts, bolts and screws are
tightened securely and that the machine is in
safe working condition.
b) Allow the mower to cool before you put it into
an enclosed area.
c) To avoid the risk of fi re, keep the motor
housing and ventilation slots clear of grass,
leaves, oil and grease.
d) Routinely check the grass basket for signs of
wear and impaired functionality.
e) For your own safety, have worn or damaged
parts replaced without delay.
f) Take care not to jam your fi ngers between
moving cutting tools and stationary parts
of the equipment while you are adjusting the
equipment.
g) While you are carrying out maintenance work
on the cutting tools, remember that the cut-
ting tools can still be moved even if the power
source has been switched o ff .
h) For your own safety, replace worn or dama-
ged parts without delay. Use only original
spare parts and original accessories.
2. Layout and items supplied
2.1 Layout (Fig. 1/2)
1. Top push bar
2. Cable strain-relief clip
3. Bottom push bar
4. Ejector fl ap
5. Carry-handle
6. Grass basket
7. Power plug
8. On/O ff switch
9. Grass box, top part of the housing
10. Grass basket, bottom part of the housing
11. 4 Wheels
12. 4 Wheel hubs
13. 4 split pins
14. Bottom push bar
15. 2 fastening screws for bottom push bar
16. 4 washers for wheels
17. 2 cable clips
18. 2 fastening screws for top push bar
19. 2 fastening nuts for top push bar
2.2 Items supplied
Please check that the article is complete as
speci fi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made bought the product
within the maximum days indicated by the con-
sumer protection laws of your country and upon
presentation of a valid bill of purchase. Also, refer
to the warranty table in the service information at
the end of the operating instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
Anl_SA_BEM_1032_SPK8.indb 24 Anl_SA_BEM_1032_SPK8.indb 24 01.12.2016 13:08:50 01.12.2016 13:08:50