DinBox Router 3G User Manual
Page 40 of 71
Name:
to indicate this connection name, must be unique
Enabled:
If enable, the connection will send tunnel connection request when it is reboot
or re-connection, otherwise it is no need if disable
Local WAN Interface:
local addresss of the tunnel
Remote Host Address:
IP/domain name of end opposite; this option cannot fill in if using
tunnel mode server
Local Subnet:
IPSec local protects subnet and subnet mask, i.e. 192.168.1.0/24; this
option cannot fill in if using transfer mode
Remote Subnet:
IPSec opposite end protects subnet and subnet mask,
i.e.192.168.7.0/24; this option cannot fill in if using transfer mode
Local ID:
tunnel local end identification, IP and domain name are available
Remote ID:
tunnel opposite end identification, IP and domain name are available
Detection:
this part contains configure information of connection detection
Enable DPD Detection:
enable or disable this function, tick means enable
Time Interval:
set time interval of connect detection (DPD)
Timeout:
set the timeout of connect detection
Action:
set the action of connect detection
Advanced Settings:
this part contains relevant setting of IKE, ESP, negotiation mode,
etc.
Содержание DinBox ROUTER 3G
