Baur PGK 110 HB, Руководство по эксплуатации, Страница: 26 / 34

4. Servicing / Maintenance
4-2
General
•
In order to avoid leakage currents or creeping discharges at the
tube or cone of the High Voltage unit it must be kept clean. For
this purpose, use only fuzz-free clothes dampened in petroleum
ether.
•
From time to time, check function of limiter lamps in the
operating unit. This can be easily carried out in short-circuit
operation by slowly increasing the voltage at the variable
transformer until lamps light up.
•
Oil for refilling around the rectifier or resistor bar is available from
BAUR.
•••••
0.8lt insulation oil Technol US 4000
ID no. 471-716
Fuse
☞
Designation Value Dimension Ident.No. Remarks
F1, F2 0,16 AT Ø 5 x 20 mm 563-005 Mains transformer, primary
F3, F4 2 AF Ø 5 x 20 mm 563-020 + 12V control
F5, F6 3,15 AT Ø 5 x 20 mm 563-021 Discharge unit (option)
(S4, F10) 16 AT Mains switch
F11
PGK 70 HB 2 A High voltage transformer, primary
PGK 110 HB 6 A High voltage transformer, primary
PGK 150 HB 6 A High voltage transformer, primary
PGK 260 HB 10 A High voltage transformer, primary
PGK 70/2,5 HB 14 A High voltage transformer, primary