TAM00720
15
DSM1
10/2015
Three-phase-synchronous motor
English
• The system installer carries the responsibility concerning a proper installation.
• The motor data on the rating plate must be considered.
• Connection cables and connectors regarding the occuring voltages and current ranges must be
rated correctly and must apply to the installation type.
• The motor connection including its components (brake, encoder, and so on) must be carried out in
accordance with the circuit diagrams (see attached circuit diagrams or chapter 7).
• To avoid electromagnetical EMC troubles of the motor supply cables and their consequences on
the encoder and the control systems shielded power- and encoder cables must be used. For this
purpose consider the EMC instruction of the manufacturer of the inverter.
• For reasons of operational safety we recommend to use the assembled connection cables of Bau-
müller (see technical product list).
• Prior to installation the connector receptacles and connectors must be checked for damages, cor-
rosion, pollution and moisture.
• To guarantee the protection class the correct and solid fit of the plug screw fittings, the sealings
and the sealing surfaces of the plugs must be regarded.
• Note! In order to guarantee the protection class the turnable sockets shouldn’t be changed in their
connection direction by turning them more than 5 times, as well.
• Plug connections must not be exposed to any mechanical loads. If required, add anti-rotation,
strain, thrust as well as flex reliefs.
