Baumuller BUG 2, Техническое описание и руководство по эксплуатации

Страница: 25 / 62

Danger Information Installation
BUG 3/2/20 Basic Feed Unit
17
Baumüller Nürnberg GmbH
5.96064.02
5 I
NSTALLATION
5.1 Danger Information
WARNING
This equipment carries a dangerously high voltage and has dangerous rotating parts (fans). Ignoring
the safety and warning information may result in death, severe personal injury or damage to property.
The machine operator is responsible for mounting the mono power unit, the motor, the transformer
and any other equipment in accordance with appropriate safety regulations (e.g. DIN, VDE); equally,
you must ensure that all other relevant national and local regulations are met with regard to cable rat-
ings and protection, grounding, disconnectors, overcurrent protection, etc.
If you carry out works at power-on drive converters you must obey the national safety rules to avoid
accidents. The electrical installation must be carried out according to the resoective guidelines (e.g.
cross-sections, fuses, protective earth attachment).
The protective earth connection has to be carried out according to DIN EN 60204/VDE 0113
Part1/06.93; section 8.2.2, also pr EN 50178/VDE 0160/11.94, sections 5.3.2 and 8.3.4, or the re-
spective local guidelines. Information about EMC-correct installation – as screeening, earthing, posi-
tioning of filters and running cables, you will find in this document. This information must be respected
also when using CE-marked drive converters.
The responsibility for keeping the limits requested by the EMC laws has the manufacturer of the plant
or machine.
Relatively high leakage to ground occurs in the converter and the motor, i.e. the drive may be incom-
patible with current-operated e.l.c.b.s (corresponding to provisional standard EN 50178:1994 Section
5.2.11.2).
You must only use variable-speed drives in applications that correspond to valid EN specifications.
DANGER
The intermediate circuit carries a voltage!
Be particularly careful before touching the drive shaft directly or indirectly with your hands. This is only
allowed when the system is deenergized and the drive is stationary.
Safety devices must never be deactivated.