Baumuller BM4-O-IEI-01 Скачать руководство пользователя страница 9

Страница: 9 / 92

Basic Safety Instructions

Operating Instructions Option Module IEI for b maXX drive PLC BM4-O-

IEI-01

of 90

2.1.2

Hazard advisories that are used

If a signal word is preceded by one of the following danger signs:

, the

safety information refers to injury to people.

If a signal word is preceded by a round danger sign:

, the safety information refers to

damage to property.

2.1.2.1 Hazard advisories about injuries to people

To be able to differentiate visually, we use a separate border for each class of hazard in-
formation with the triangular and rectangular pictograms.

For danger classification

DANGER,

we use the

danger sign. The following hazard in-

formation of this danger classification is used in this documentation.

For danger classification

WARNING,

we use the

danger sign. The following hazard

information of this danger classification is used in this documentation.

For danger classification

CAUTION,

we use the

danger sign. The following hazard

information of this danger classification is used in this documentation.

DANGER

The following

will occur

if you do not observe this danger information:

serious personal injury

death

Danger from:

electricity.

The hazard may be described in more detail here.

Here, we describe what you can do to avoid the hazard.

DANGER

The following

will occur

if you do not observe this danger information:

serious personal injury

death

Danger from:

mechanical effects.

The hazard may be described in more detail here.

Here, we describe what you can do to avoid the hazard.

WARNING

The following

may occur

if you do not observe this warning information:

serious personal injury

death

Danger from:

electricity.

The hazard may be described in more detail here.

Here, we describe what you can do to avoid the hazard.

Содержание BM4-O-IEI-01





























































































Результаты поиска

Содержание BM4-O-IEI-01

Отзывы:

Бренды по названию

Популярные бренды

Baumuller BM4-O-IEI-01, Руководство по эксплуатации

Результаты поиска

Содержание BM4-O-IEI-01

Отзывы:

Бренды по названию

Популярные бренды