Responsibility of the operator
Instruction handbook Mains filters
BFN
Document No.: 5.09010.03
Baumüller Nürnberg GmbH
10
2.4
2.4
Responsibility of the operator
The device will be used in commercial areas. Thus, the proprietor of the device is subject
to the legal work safety regulations.
Along with the notes on work safety in these operating instructions, the safety, accident
prevention and environmental protection regulations valid for the area of application of
this device must be complied with. Whereby:
m
The proprietor must inform himself about the applicable work health and safety regu-
lations and ascertain, in a risk analysis, any additional hazards that could arise from
the special working conditions in the use area of the device. These must then be im-
plemented in the form of operating instruction for operation of the device.
m
These operating instructions must be kept accessible to personnel working with the de-
vice at all times in the immediate vicinity of the device.
m
The specifications of the operating instructions must be adhered to completely and
without exception!
m
The device may only be operated in a technically faultless and operationally safe con-
dition
2.5
Personnel training
m
Certain activities can only be performed by the persons stated in the respective
chapters of these Instruction Handbook.
In this Instruction Handbook the following qualifications are stipulated for various areas of
activity:
Operating
personnel
n
The drive system may only be operated by persons who have been specially trained,
familiarized and authorized.
n
Troubleshooting, maintenance, cleaning, maintenance and replacement may only
be performed by trained or familiarized personnel. These persons must be familiar
with the operating instructions and act accordingly.
n
Commissioning and training may only be performed by qualified personnel.
Qualified
personnel
n
Electrical engineers authorized by Baumüller Nürnberg GmbH, and qualified electri-
cians of the customer or a third party who have learned to install and maintain
Baumüller drive systems and are authorized to ground and identify electrical power
circuits and devices in accordance with the safety engineering standards of the com-
pany.
n
Qualified personnel have had occupational training or instruction in accordance with
the respective locally applicable safety engineering standards for the upkeep and
use of appropriate safety equipment.
WARNING!
Risk of injury due to insufficient qualifications!
Improper handling can lead to significant personal injury and material damage.
Therefore:
