Baumuller b maXX BMC-M-SAF-02, Руководство по эксплуатации

Страница: 101 / 120

101
of 118
Operation Manual b maXX safe PLC BMC-M-SAF-02
Document no.: 5.07020.04
A
PPENDIX
B - A
CCESSORIES
This appendix lists all accessory items which are available from Baumüller Nürnberg
GmbH for the b maXX safe PLC module.
If you have enquiries or suggestions on the accessory items, the Baumüller product man-
agement will be glad to assist you.
B.1 List of all accessory items
B.1.1 Programming cable (serial RS232)
Conduction type: K-SS-01-xx (9-way sub-D, 9-way sub-D):
B.1.2 Cable for connection HMI interfaces (operator control panels, touchscreens, etc.) to the RS485
interface
Since the pin configuration of a RS485 interface is not standardized, Baumüller cannot
offer a finished cable.
A cable stranded in pairs with a recommended cross-sectional area of 0.5 mm², PVC out-
er jacket and overall shielding made of tinned copper meshwork will have to be used.
The overall shielding will have to be applied to the metallic cable sockets or plugs, if ap-
plicable.
Such as: Type LIYCY 6 x 2 x 0.14 mm²
For pin configuration, see
Z
D.4 Pin configuration of sub-D socket for RS485 interface
–
from page 111 onward.
Type Length [m] Item number
K-SS-01-03 3 213 846
K-SS-01-05 5 213 283
K-SS-01-15 15 231 086