background image

TP900/800 Series Quick Reference Card

Start Up

When power is switched on to supply power, a logo screen will appear on the display. If no button is pressed, a 

LINK

 message will appear. Press any 

button to link the panel with the system. 
Soon after power-up, the spa will enter 

Priming Mode 

and the Spa Screen will appear. Navigate to the  

Jets Buttons 

by using the Up, Down, Left, and Right Buttons 

  

  

  

. When a 

particular Jet button is highlighted, press Select 

 to turn that pump on and off, verifying that all 

air is purged from the plumbing, 

particularly the plumbing associated with the heater (Heater Pump).

 If 

the spa uses a circulation pump, the 

Circ Button

 

 can be used to manually turn the Circ Pump on 

and off during Priming Mode only. Priming Mode will end automatically in 4 minutes. Selecting the 

Exit 

Button

 

 will exit Priming Mode manually and the Main Screen will be displayed. When Priming Mode 

ends (and the spa is in Ready Mode), the Heater Pump will start, yet the water temperature will not 
appear until the water temperature is recognized by the system. If the water is below the  

Set Temperature,

 the heater will start.

Basic Operation

 

The 

Set Temperature 

is changed by navigating to the left while on the 

Main Screen.

 Once the Set Temperature is highlighted, adjust the temperature 

using the Up and Down Buttons. (The Set Temperature and the actual water temperature are often different.) Press-and-hold for faster adjustment.  
The new Set Temperature is programmed immediately and the spa will now heat to the new Set Temperature.

Programming

Refer to the TP900/800 User Guide (40985) for detailed operation, programming and message instructions.

Navigating the deeper menu structure is done by selecting one of the items on the right side of the 

Main Screen.

   

Selecting “Settings” will allow access to a variety of programming functions. 
Depending on the screen displayed, waiting between 10 and 30 seconds will allow the panel to return to normal operation and a display of spa status. 

Priming Mode

Exit

Jets 1

Jets 2

Jets 3

Circ

68.143%

Отзывы: