manualshive.com logo in svg

Baumuller b maXX BM4-O-CAN-03, Инструкция по эксплуатации

Поделиться
Скачать
Baumuller b maXX BM4-O-CAN-03 Скачать руководство пользователя страница 10

Hazard information and commandments

Instruction handbook 

CANopen slave

 

BM4-O-CAN-03

Document no. 5.02014.06

Baumüller Nürnberg GmbH

10

of 68

2.1

2.1.1

Structure of a hazard information

The following examples show the principle construction of a hazard information. A triangle 
is used, if there is a danger against humans. If the triangle is missing, the notes of danger 
only refer to damages to property.

A triangle shows, that there is a danger for humans.

The color of the border shows, how great the hazard is - the darker the color the greater the 
danger is.

The icon in the square describes the hazard.

The color of the border shows, how great the hazard is - the darker the color the greater the 
danger is.

The icon in the circle demonstrates a command. This command must be followed by the op-
erator.

(the circle is dashed, because not by every hazard information a command is existent as icon)

The circle demonstrates, that a danger for damage to property exists.

The icon in the square describes the hazard.

The color of the border shows, how great the hazard is - the darker the color the greater the 
danger is. (the square is dashed, because not by every hazard information the danger is 
demonstrated as an icon)

The text next to the icons is constituted as follows:

HERE IS THE SIGNAL WORD, WHICH SHOWS THE LEVEL OF THE DANGER

Here we write, if one or more of the consequences mentioned below appear,

 

if this warning 

information is not followed.

m

here we describe the possible consequences. The worst consequence is rightmost.

Here we describe the danger.

Here we describe, what you can do, to avoid the hazard.

Содержание b maXX BM4-O-CAN-03







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды