BAUMOT B 200, Руководство по эксплуатации

Страница: 5 / 15

5
2. START-UP
2.1. Delivery details
The BAUMOT shuttle kiln is generally delivered by a transport company. The
delivery must always be inspected for damage to the packaging immediately upon
delivery. Should damage be evident, unpack the delivery together with the driver and
inspect the goods for signs of damage. Write a description of all signs of damage on
the delivery slip. It is essential to have the driver countersign the document. Retain a
copy of the damage complaint. Inform the transport company of the damage
immediately. Subsequent complaints will not be considered.
2.2. Operation area/assembly site requirements
Select a suitable location that complies with the following rules and prepare the
location accordingly:
General assembly information:
•
Place the shuttle kiln on an even surface.
•
There must be at least 50 cm of space between all sides of the kiln and the
walls.
•
The floor, ceiling insulation, walls, dividing walls, covers, etc. must be made of
heavy-duty inflammable materials.
•
Ensure that the assembly site is well ventilated. Otherwise an exhaust unit
must be installed. In all cases, a ventilation technician must be consulted.
2.3. Power source information/RC device
To operate the kiln in workshops, laboratories, etc., it is imperative that a separate
power supply with its own safeguard be prepared. If the building network is
safeguarded by a circuit interrupter, then the operation of the heat-treatment and
annealing furnaces must also be operated from and safeguarded by an RC device
(ground fault circuit interrupter) with a rated current of 0.03 A.
If necessary, the power supply for the workshop area must be retrofitted with a
RC device that has a release current of >300mA.
An RC device with a lower release current can cause premature release and impede
the heat-treatment process.