Baumer VEXG Скачать руководство пользователя

Страница: 28 / 68

7.3

Acquisition Modes and Timings

The image acquisition consists of two separate, successively processed components.

Exposing the pixels on the photosensitive surface of the sensor is only the first part of the

image acquisition. After completion of the first step, the pixels are read out.

Thereby the exposure time (t

exposure

) can be adjusted by the user, however, the time need-

ed for the readout (t

readout

) is given by the particular sensor and image format.

Baumer cameras can be operated with differtent acquisition modes, the

Continuous

Mode (Free Running Mode)

, the

Acquisition Frame Rate Mode,

the

Single Frame Mode,

the

Multi Frame Mode

and the

Trigger Mode

The cameras can be operated non-overlapped

or overlapped. Depending on the mode

used, and the combination of exposure and readout time:

Non-overlapped Operation

Overlapped Operation

Here the time intervals are long enough

to process exposure and readout succes-

sively.

Notice

Applies for cameras with Rolling

Shutter sensor

The Acquisition Mode

Non-Overlapped

Operation

is only available in Trigger

Mode.

In this operation the exposure of a frame

(n+1) takes place during the readout of

frame (n).

Notice

Applies for cameras with Rolling

Shutter sensor

The Acquisition Mode

Overlapped Op-

eration

is only available in Free Running

Mode.

Exposure

Readout

Exposure

Readout

7.3.1 Continuous Mode (Free Running Mode)

In the "Free Running" mode the camera records images permanently and sends them to

the PC. In order to achieve an optimal result (with regard to the adjusted exposure time

exposure

and image format) the camera is operated overlapped.

In case of exposure times equal to / less than the readout time (t

exposure

≤ t

readout

), the maxi-

mum frame rate is provided for the image format used. For longer exposure times the

frame rate of the camera is reduced.

Exposure

Readout

Exposure-

Active

exposure(n)

Exposure-

Active(n)

ExposureDelay

Exposure-

Active(n+1)

readout(n+1)

readout(n)

exposure(n+1)

ExposureActive

= t

exposure

Non-overlapped means the same as sequential.

Image parameters:

Offset
Gain
Mode
Partial Scan

Timings:

A - exposure time

frame (n) effective

B - image parameters

frame (n) effective

C - exposure time

frame (n+1) effective

D - image parameters

frame (n+1) effective

Содержание VEXG





































































Результаты поиска

Содержание VEXG

Отзывы:

Похожие инструкции для VEXG

Бренды по названию

Популярные бренды

Baumer VEXG, Руководство пользователя

Результаты поиска

Содержание VEXG

Отзывы:

Похожие инструкции для VEXG

Бренды по названию

Популярные бренды