Baumer TA200, Руководство по эксплуатации

Страница: 21 / 28

TA200
www.baumer.com
21
Test end
The test routine can only be interrupted by switching off the device.
After switching the mains supply back on, the product is automatical-
ly ready for operation.
Test program version
Press the key. Switch on (hold the key down for this period).
Display: Program number and version number
Display: Program date
4 Operating mode
Operation and application are described in this chapter.
●
After switching on the supply voltage, the product is automatical-
ly ready for operation.
On the operating mode, it is possible to read tacho display F1, e.g.
supply speed, rotational speed, cycle rate, no. of strokes, flow etc.
Tachometer display F1
➜
Read the display value
5 Programming mode
This chapter describes the process used to program the controller.
On programming mode, it is possible to adjust operating parameters.
In the programming field, all machine-related functions and values
can be programmed.
Key assignment
There can be a difference between the key assignment used on the
operating and programming level. For this reason, all functions are
described here in full.
Key
Switches to the next operating parameter on the operating and pro-
gramming level. For fast run-through, keep the key pressed down.
Key
Switches over between programming and operating level.
Key
Selects the first or next required decade. The respective selected
decade position flashes.
Key
When this key is pressed, the respective decade position switches
on by one value.
Programming set-up and the three programming fields are now de-
scribed in order of their application.
Switching on the
➜
Press the key.
programming function
●
The system switches from operating to programming level.
●
The
CodE
display appears
➜
Enter the code: and , press the key .