Baumer LXG series Скачать руководство пользователя страница 7

Страница: 7 / 66

2. General safety instructions

Observe the the following safety instruction when using the camera to avoid any damage

or injuries.

Caution

Provide adequate dissipation of heat, to ensure that the temperature does

not 50 °C (+122 °F).

The surface of the camera may be hot during operation and immediately

after use. Be careful when handling the camera and avoid contact over a

longer period.

3. Intended Use

The camera is used to capture images that can be transferred over a GigE interface to a

PC.

Notice

Use the camera only for its intended purpose!
For any use that is not described in the technical documentation poses dangers and will

void the warranty. The risk has to be borne solely by the unit´s owner.

4. General Description

No. Description

LXG-40M.P

C-Mount only.

LXG-120M.P / LXG-200M.P

lens mount (M58), adapter for

other lens mounts available

Signaling LED

Data Port 1 (PoE)

Digital-IO (RS485)

Power Suppy / Digital-IO

Содержание LXG series



































































Результаты поиска

Содержание LXG series

Отзывы:

Похожие инструкции для LXG series

Бренды по названию

Популярные бренды

Baumer LXG series, Руководство пользователя

Результаты поиска

Содержание LXG series

Отзывы:

Похожие инструкции для LXG series

Бренды по названию

Популярные бренды