IMPORTENT NOTES
MB245EN - 11171693, 19A3, Baumer_PMG10-SSI_II_EN 2/29
1.4
Maintenance and service life
The device may be only opened as described in this instruction� Repair or maintenance
work that requires opening the device completely must be carried out by the manufacturer�
Alterations of the device are not permitted�
The expected service life of the device depends on the ball bearings, which are equipped
with a permanent lubrication�
In the event of queries or subsequent deliveries, the data on the device type label must be
quoted, especially the type designation and the serial number�
1.5
Approvals and warranty
EU Declaration of Conformity meeting to the European Directives�
We grant a 2-year warranty in accordance with the regulations of the Central Association of
the German Electrical Industry (ZVEI)�
i
warranty seal
Damaging the warranty seal on the device invalidates warranty�
1.6
Operating and storage temperature range
The storage temperature range of the device is between -15 °C and +70 °C (caused by
packing)�
The operating temperature range of the device is between -40 °C and +95 °C (device with
speed switch with solid state relay: -40 °C and +85 °C), measured at the housing�
1.7
Disposal (environmental protection)
Do not dispose of electrical and electronic equipment in household waste� The
product contains valuable raw materials for recycling� Whenever possible, waste
electrical and electronic equipment should be disposed locally at the authorized
collection point� If necessary, Baumer gives customers the opportunity to dispose
of Baumer products professionally� For further information see www�baumer�com�
Содержание Hubner PMG10
Страница 35: ...MB245EN 11171693 19A3 Baumer_PMG10 SSI_II_EN...