Baumatic Pythagora PI3SS, Инструкция по эксплуатации, Страница: 19 / 28

3) Lift the framework to the ceiling and mark the position of the 4
screw holes that are indicated by the arrows in figure 3.
4) Remove the framework from the ceiling. Using a drill bit with an 8
mm diametre, drill out the holes on the ceiling that you have just
marked and insert rawlplugs into them.
5) Fasten the framework to the ceiling, using the screws provided.
6)
Adjust the inner and outer chimney sections to
your required height. Use masking tape to secure
the chimney sections during the installation
process.
o
IMPORTANT: If you are installing the
appliance at minimum height, then you only
need to utilise the outer piece of the two
chimney sections.
19