Baumatic PO900SS, Инструкция пользователя, Страница: 28 / 36

28
ws are
all fully tightened between the links. This should be done
IMPORTANT: The appliance must NOT be connected to the
o
apped when the oven is in position. Care must be
ken to avoid the cable being in contact with hot parts of the
the mains supply cable is damaged, then it must be replaced with a
he mains supply cable should be replaced in accordance with the
n.
o
Replace the cable with one of the same length and in accordance
o
low” earth wire must be connected to the terminal
arked
o
If when the oven is first switched on, it does not function
correctly, you should recheck that the terminal scre
before contacting the Customer Care Department.
o
mains supply by means of a 13A plug and socket.
The cable can be looped if necessary, but make sure that is not
kinked or tr
ta
appliance.
Replacing the mains supply cable
If
suitable replacement.
T
following instructions:
o
Switch the appliance off at the socket.
o
Open the terminal block on the back of the ove
o
Unscrew the terminal screws fixing the cable.
with the specification given on page 26.
The “green-yel
m
. It must be about 10 mm longer than the live and
o
onnected to the terminal
marked with letter (N) - the live wire must be connected to the
terminal marked with letter (L).
neutral wires.
The “blue” neutral wire must be c