background image

Using a ceramic hob scraper 
 

Your appliance will be provided with a hob scraper. The following 
guidelines should also be followed when using the ceramic hob 
scraper:- 
 
 
 

 
 
 
 
 

o

 

The scraper should be placed on the ceramic surface at an angle. 

 

o

 

Residues should be removed by sliding the blade carefully over 
the ceramic surface. 

 

o

 

The ceramic surface should be wiped with a damp cloth that has 
been placed in warm water mixed with a small amount of 
washing up liquid. 

 

o

 

Dry the appliance by rubbing the surface with a clean cloth.

 

 

Using a specialist ceramic hob cleaner 
 

It is possible to purchase a specialist ceramic hob cleaner/conditioner. 
 
You should follow the instructions given by the manufacturer of the 
specialist ceramic hob cleaner. You should ensure that it is suitable for 
use on your appliance. 
 

Installation 

 

The installation must be carried out by a suitably 
qualified person, in accordance with the current 
version of the following. 
 

o

 

UK Regulations and Safety Standards or their European 
Norm Replacements. 

o

 

Building Regulations 

(issued by the Department of the 

Environment). 

o

 

Building Standards

 (issued by the Scottish Development 

Department). 

o

 

IEE Wiring Regulations.

 

o

 

Electricity At Work Regulations.

 

 
 
 

 

22

Содержание PHC620SS

































Отзывы: