Baumatic F90.2BL, Инструкция по эксплуатации

Страница: 22 / 28

22
ompleting the installation
you are setting the appliance to recirculation mode, then you should
ee the “Fitting the carbon filters”
ection on page 13.
ment
late, which is placed inside the cooker hood. The
ppliance should now be connected to the electrical supply. See page
pply
to the appliance. Check that the appliance is operating
correctly by selecting each speed and switching the light
Extraction mode or recirculation mode?
C
If
now fit the two carbon filters. S
s
The electrical connection must correspond to the electrical require
noted on the rating p
a
14 – 15 for detailed information on the electrical connection.
Use a stainless steel cleaner on the stainless steel sections of the
appliance.
Refit the grease filter and then switch on the mains su
bulbs on and off.
What is the difference between extraction and recirculation
modes?
room via external ducting.
e
ir.
ugh a charcoal filter for purification. The air then re-enters the
itchen via an opening in the hood
.
ll cooker hoods have a grease filter but if you are using your cooker
ust be fitted in
ddition to the grease filter.
To get optimum performance from your cooker, the air will be taken
out of the
Unfortunately if you live in a flat or the hood is too far from an outsid
wall, this may not be possible. The only alternative is to recirculate the
a
In recirculation mode stale air is taken via the grease filter, and passed
thro
k
What is a charcoal filter and do I need one?
A
hood in recirculation mode, then a charcoal filter m
a
Get user manuals: See SafeManuals.com