13
14
Special features
Operation Method:
1. Press [ON/OFF] button;
2. Turn on the tap, put down the drain pipe.
3. Put in the washing load and detergent(Do not sprinkle
the detergent on the clothes directly, to avoid the clothes
color fading),close the lid;
4. A: While selecting "Soaking","Jeans","Baby Clothes"
program, press [Delay]button, select the delay time,
and then press [Start/Pause] button to start the
"delay"program.After "delay" started, the washing
machine will take the fuzzy weighting, and then start the
"delay"timing.After the fuzzy weighting finished, the washing
machine can select the water level within one min, after that, it will come into the formal
"delay"status,the buttons can not be operated except [Delay] button,[ON/OFF] button and
[child lock] button. B:While selecting"Standard" "Quick","Blanket", "Delicates", "Drum
Clean",press [Delay] button, select the delay time, and then press [Start/Pause] button
to start the"delay"program.The buttons can not be operated except [Delay] button,
[ON/OFF] button and [child lock]button.
Notice: Long press [Delay] button, every 0.5s will increase 1 hour, and also have a beep
once, when after reach to 24 hours, it will return to the initial state.
When "delay" starts, there will be an"delay alarm"if consumer open the lid, and if consumer
close the lid, this alarm will be released. But while the machine is running, if consumer
open the lid, there will be no alarm. After "delay" starts(do not press "child lock"button),
consumer can review the set programs when press [Delay] button again.
Delay:
Press the “DELAY” button each time, the
number on the digital indication adds by
“1”;After the number reaches “24”,press
the “DELAY”button each time,the number
adds by“6”;After the number reaches 48,
the light of delay time is turned off, and
the delay program return to original status.
Special features
Child Lock
:
1. This function is effective only after program starts;
2. Press [Start/Pause]button to start the program, then press [Rinse] & [Program] button at
same time to start the child lock function. If consumer wants to close this function, they
can re-press [Rinse]&[Program]button at the same time.
3. When "child lock"started,if open the lid during the running process,there will be an alarm.
Open the lid within 20s,there will be a "E3"alarm,if close the lid within 20s,the alarm will be
released,and continue to run the previous program which before opening the lid.If the lid
opened after 20s,the display will show"CL" alarm named "normal failure alarm",the drain
valve will be opened.after the water drained lasting for 90s,the drain valve will be closed.
During this process,the alarm still can not be released.The normal alarm will be happened
every 15 mins,consumer can power off the machine or unplug to release this alarm.
Program Pause and restart:
1. When program paused,all load closed,the controller will stop running;
2. When restart the program,the washing machine will run the program before pausing.
Fuzzy weighting function:
1. Press "ON/OFF" button;
2. Turn on the tap, put down the drain pipe.
3. Put in the washing load and detergent(Do not sprinkle the detergent on the clothes directly,
to avoid the clothes' color fading),close the lid;
4. Select "Soaking","Jeans","Baby Clothes" program. The washing machine will
select the water level automatically according to the load weight.
5. Press [Start/Pause] button to run fuzzy weighting function.
Notice:
1. When there's water in the tub,this function is not available;
2. This function can be only applied under the programs of "Soaking","Jeans","Baby Clothes";
3. Before press [Start/Pause] button,if consumer selected the water level,there will be no
fuzzy weighting function;
4. After press [Start/Pause] button,the washing machine will run the fuzzy weighting function.
Consumer can also select the water level to set the water level as needed.
Self Power off function:
1. After the program finished,the washing machine will power off automatically;
2. If consumer selected the program but not press the [Start/Pause] button,the washing
machine will power off automatically after 10 mins;
3. When alarm happened and was not released,the washing machine will power off after 1 hour;
4. When consumer pressed the [Start/Pause] button during the running process,and forgot
to re-press it to continue the program,the washing machine will power off after 1 hour.
Unbalance Control:
1. During the spin process,and under the condition of safety switch connected,if the sudden
break happened,the washing machine will come into the unbalance adjustment situation;
2. While coming into the unbalance adjustment process,the rinsing LED flashed,inlet the
water to reach to the set level,adjust the clothes' status,drain after finished rinsing,and
return to the normal spinning process.If it is not effective after 3 times' adjustment,there
will be an alarm.
Water cycle:
After rinsing, keep the last rinsing water,and do not drain.Water cycle function can be selected
only under the Jeans program , and need to have the rinsing process
(
While consumer select the
water cycle function,there will be no drainning and spinning after the last rinsing,the water will be kept in the drum.)
Power failure memory function
If the power supply becomes off suddenly during operation , the machine remembers
the current operation state . When power is on ,the machine returns to former operation
state automatically.