Malfunction display and solutions
When the washer is in trouble, please contact local service office or the sales service
department of our company and the customer should not dismantle the machine
without permission.
If the washer can not work normally, and the abnormal indication is shown in the digital
display window or the machine alarms, please check and correct as follows.
Technical specifications
Size
Rated input
power
Rated voltage
Rated frequency
Weight of the
product
Maximum water
pressure permitted
in the water inlet
Minimum water
pressure permitted
in the water inlet
Model
BWM55
340W
240V~
50Hz
0.6Mpa
0.1Mpa
32kg
5.5kg
530X542X925(mm)
Rated capacity of
wash and spinning
(dry clothes)
Falut
Cause of fault
Indication
Alarm of the
buzzing sound
Drain Alarm
Alarm for
opening lid
Imbalance
Alarm
Water injection for about
30 mins, but do not reach
preset water level.
Open the lid during washing
or spinning process. Open
the lid after start the delay
time.
“E1”flares
“E2”flares
“E3”flares
“E4”flares
The buzzer goes
on buzzing for 10
seconds. If the
fault is not solved,
buzzes again for
10 seconds in
every 15minutes.
Open the lid to
deal with faults,
then close the
lid to stop the
alarm.
Alarm for
water inlet
Checked imbalance for
the third time.
Stopping alarm
Drain off water 10 mins not
arrive at empty water level.
Note:The program which has E4 alarm when shocked in the first time is “Drum Clean”.
19