Baumatic BWM5001, Инструкция по эксплуатации

Страница: 35 / 40

E4 Very little water
is supplied.
o
Tap is not turned on; there
is a water failure or low
water pressure so the water
cannot reach the set level
after a long time.
o
Turn on the tap or
re-use when the
water pressure is
normal.
E6 Abnormal water
level sensor.
o
Water level sensor failure,
short circuit or circuit break.
o
Call the Customer
Care Helpline.
E7 Constant water
supply or
automatic
drainage.
o
Abnormal inlet valve or
water level sensor.
o
Turn off the power
supply after
drainage and call
the Customer Care
Helpline.
If a fault code reappears after following the
above advice and clearing the fault code. You
should turn the washing machine off using
the POWER button. Disconnect the appliance
from your mains supply. Then arrange for an
engineer to attend the appliance. You should
contact the Baumatic Customer Care
Department on 1800 444 357.
IF AN ENGINEER ATTENDS DURING THE
GUARANTEE PERIOD AND FINDS THAT A FAULT
HAS BEEN CAUSED BY AN ITEM ON THE ERROR
CODE LIST, WHICH COULD HAVE BEEN CLEARED
BY THE CUSTOMER, THEN YOU MAY BE LIABLE
FOR THE COST OF THE SERVICE CALL.
35