Baumatic BWM50, Инструкция по эксплуатации

Страница: 25 / 36

25
Adjusting the height of the appliance
o
Place the machine on a solid and level floor surface.
o
If the floor is uneven, the appliance should be adjusted
otherwise the washing machine will not function properly. The
uneven surface also vibrates the machine and causes it to move
from its original position while in use.
o
The adjustable feet of the washing machine allow you to correct
the levelness of the appliance.
o
First unscrew the adjusting nut using a spanner.
o
Adjust the height of the legs by rotating the foot.
o
When the appliance is set to the correct height, screw the nut
back tightly to lock into position.
o
Make sure that the washing machine does not move when you
press down the top four corners of the machine.
IMPORTANT: There should be no instability of the machine when the
adjustable legs have been set to the correct level.
Installing the spacers
o
Remove the spacers from the accessories provided with the
appliance.
o
Each spacer has two clasps as shown in the drawing on the next
page. Ensure that clasp A is secured to the right hand slot of
hole 1. Clasp B should be secured to the left hand slot of hole 1.
o
Fix the second spacer to hole 2 using the same method as
above.