Baumatic BWE40, Инструкция по эксплуатации

Страница: 6 / 30

Your Baumatic BWE40 Wine Cooler
5
Tips on Setting up your
Wine Cooler
o
Do not place the wine cooler under direct sunlight, or in a hot (i.e. - above
25
°C
) area or in a humid place (frost will form). Likewise, keep it out of
an area that will get very cold as very cold conditions will prevent your
Wine Cooler from keeping your wine at the temperature you want.
~
o
Make sure your wine cooler is resting on a flat surface so that there is no
risk of bottles being able to tip forward. Note that your Wine Cooler has
adjustable feet so you can adapt your Wine Cooler to your floor surface.
Turning the feet clockwise will raise the height of the unit. Turning them
anticlockwise will lower the height.
~
o
Remove all exterior and interior packaging, including protective foam on
the door panels. Remember that children are particularly vulnerable to
packaging materials and old appliances – discard materials with this in
mind.
~
o
Check to be sure the following parts are included:
9 6 slide out shelves
9 1 wine rack
9 1 instruction manual
~
o
Your Wine Cooler needs space around it to function properly. Because it
operates using a compressor, it is very important that you give it at least 5
inches (12.7cm) between the back and any surface behind it as well as
between the sides and any surfaces around them. This is necessary so that
your Wine Cooler has adequate space for ventilation so that it won’t
overheat and present a fire hazard.
~
o
Before connecting the appliance to the power source, let it stand upright
for approximately 2 hours. This will reduce the chances of a malfunction
in the cooling system from handling during transportation.
~
o
You can replace the shelves with wooden ones (BW29KIT), if desired. This is
available as an optional extra.
~
o
You can reverse the swing of your Wine Cooler’s door. See page 19 for
instructions on how to do this.