Baumatic BWC614SS-ANZ, Руководство пользователя

Страница: 11 / 28

11
During first use
IMPORTANT: When you use the wine cabinet for the first time
or restart the appliance after it has been turned off for a long
time, there could be a few degrees variance between the
temperature you select and the one indicated on the LED
display. This is normal and it is due to the length of activation
time. Once the wine cabinet has been running for a few hours
everything will be back to normal.
o
When you first switch on the appliance, the compressor will run
continuously until the wine cabinet reaches a cool enough
temperature.
o
During this period of time, you should try not to open the door
frequently or place bottles inside of the appliance.
o
If the unit is switched off or unplugged, you must allow at least 5
minutes before restarting the appliance or reconnecting it to
your mains supply.
Switching on the appliance and setting the temperature
o
To switch the appliance on, press the power button (1). To turn
the appliance off again, press and hold the power button for 5
seconds.
o
The temperature for each zone will need to be set individually.
The temperature settings for both zones are adjustable within
the range of 5°C - 22°C / 40°F - 71°F.
o
The temperature set for the lower zone must always be
the same or higher than that in the upper zone.
o
Use the plus (4) and minus (3) buttons on the left side of the
control panel to set the internal temperature of the upper zone.
o
Use the plus (4) and minus (3) buttons on the right side of the
control panel to set the internal temperature of the lower zone.
o
When these buttons are pressed for the first time, the LED
displays will show the preset factory temperatures of 12°C /
54°F for the upper and lower zones.
o
The temperature that you desire to set will increase 1°C or 1°F if
you press the plus (4) button once. The temperature will
decrease by the same amount if you press the minus (3) button
once.