Baumatic BVD50, Инструкция по эксплуатации

Страница: 20 / 24

Error code failure system
If your appliance senses that it is not operating correctly, then an error
code may be displayed and an alarm may sound.
BEFORE COMPLETING ANY MAINTAINEANCE ON THE
APPLIANCE, IT SHOULD BE DISCONNECTED FROM YOUR
POWER SUPPLY.
Error code Possible causes Solutions
Middle dry and
extra dry indicators
are flashing.
o
The drying
temperature has
exceeded 63°C during
a programme.
o
Unplug the dryer and
wait until the
temperature has
sufficiently dropped
before restarting.
Light dry and
middle dry
indicators are
flashing.
o
The tumble dryer
drawer has been
opened after the
programme has
started.
o
Close the tumble
dryer door properly
and restart the drying
programme.
The 1 hr
programme and
light dry indicators
are flashing.
o
Programme start
sensor malfunction.
o
Restart the tumble
dryer and if the
problem remains call
the Service
Department.
The 1 hr
programme and
middle dry
indicators are
flashing.
o
Programme start
sensor malfunction.
o
Restart the tumble
dryer and if the
problem remains call
the Service
Department.
o
An alarm will sound when an error code is being displayed. The
alarm will sound for 10 seconds every 16 minutes until the issue
is resolved or the appliance is unplugged.
If a fault code reappears after following the above
advice and clearing the fault code. You should
disconnect the appliance from your mains supply.
Then arrange for an engineer to attend the
appliance. You should contact the Service
Department on 1800 444 357.
IF AN ENGINEER ATTENDS DURING THE GUARANTEE
PERIOD AND FINDS THAT A FAULT HAS BEEN CAUSED
BY AN ITEM ON THE ERROR CODE LIST, WHICH COULD
HAVE BEEN CLEARED BY THE CUSTOMER. THEN YOU
MAY BE LIABLE FOR THE COST OF THE SERVICE CALL.
20