Baumatic BVD50, Инструкция по эксплуатации, Страница: 15 / 24

The lint filter
o
The fluff and debris which accumulates
on the filter will block the air circulation
which will cause the drying time and
energy consumption to increase.
Therefore the lint filter should be
cleaned after each use.
o
To remove the filter, open the tumble
dryer door and locate the filter at the
base of the porthole opening. Squeeze
the sides and pull the filter upwards to
take it out.
o
Clean the lint filter by wiping off the
scrap threads and fluff which have
accumulated on it.
o
Reinstall the filter.
o
DO NOT allow lint to build up around the dryer.
o
A torn or damaged filter must be replaced immediately.
o
Overloading laundry can increase lint build up because the air
flow is reduced.
o
The interior of the dryer should be cleaned of any accumulated
lint at regular intervals. This must be done by a qualified person
for electrical safety.
o
If you change the mounting of the dryer from upright to inverted
or visa versa, the dryer must be cleaned internally by a
serviceman.
o
IMPORTANT: NEVER operate the tumble dryer without the
lint filter in place.
The tumble dryer drum
The drum of your tumble dryer is constructed from stainless steel.
However if there are objects that can rust placed inside the drum, then
it is possible for the drum to become stained.
IMPORTANT: Do not use a descaling agent, iron/steel wool or
scouring agents to clean the drum of your appliance.
o
Remove any rust stains on the drum with an appropriate
stainless steel cleaning agent.
15