162579
FITTING BAR
Install the Fitting Bar (shown in the picture below) so that it
attaches to the top of the appliance and underneath the top of
the cabinetry, indicated by the arrow:
1) Using a 2.8 mm diameter bit, make holes suf
fi
cient to attach
the rail as shown on the left. NOTE - door area
below
the rail
must reach to just below appliance.
2) Fix the hanging rail onto the inside of the décor door using
two 10mm screws, centering it so that 262mm of its width is
on either side of the imaginary vertical middle line of the décor
door.
3) Clasp the eyelet holes in the rail on the inside of the décor
door over the bolts protruding from the top edge of the
refrigerator door. Secure these using the nut caps provided,
as shown in the above illustration. Make sure that you have
the décor door attached levelly before proceeding to the lower
fastenings as shown on right.
Please be aware that the Fitting Bar is not attached
to the appliance and needs to be secured during
installation.
Fitting the Décor Door
18
Installing your
Appliance- continued
