162579
MAINTENANCE FROM TIME TO TIME, YOU WILL NEED TO
REPLACE THE INTERNAL BULB. REMEMBER TO UNPLUG
YOU APPLIANCE FIRST
Find the lamp housing in the top right of the refrigerator’s
interior.
Gently move the transparent lamp cover plate from the lamp
cradle.
Unscrew the bulb and replace with a new one, maximum
10W.
HOW TO CLEAN THE CONDENSER – the condenser consists
of a coil structure at the back of your freezer.
To clean it, carefully follow the following instructions:
To optimize the operation of the appliance and to save energy
you should periodically clean the dust from the condenser at the
back of the appliance.
NOTE: You will be alerted to the presence of excessive
amounts of dust on the condenser by a sound alarm.
Upon hearing this alarm, you should:
• Check the air circulation through the bottom rail openings.
• If necessary, clean or vacuum the dust from the condenser.
See the instructions below & on the next page.
To check if there is dust and clear dust away
1. If the air opening in the bottom rail of the fridge is dirty or
dusty, you should clean or vacuum it (see the
fi
gure below).
2. Remove the bottom board of the unit cabinet.
3. Push a
fi
nger through the opening in the bottom rail and
release the fastener.
4. Pull the rail towards you and remove it.
6. Pull the condenser dish out.
7. Use the vacuum cleaner to clean the dust from the condenser.
8. Replace the condenser dish & the bottom rail in the opposite
order to taking them out.
Disconnect the freezer from the mains before you clean the
condenser!
Never Use Solvents To Clean Your Freezer
14
