Baumatic BTW600ME, Руководство пользователя, Страница: 23 / 28

23
Extraction mode or recirculation mode?
IMPORTANT: YOU WILL HAVE TO DECIDE BEFORE
INSTALLING YOUR COOKER HOOD WHETHER TO USE
IT IN EXTRACTION MODE OR RECIRCULATION
ODE.
the difference between extraction and recirculation
ion. The air then re-enters the
itchen via an opening in the hood
.
r hood is
this may not be possible. The only alternative is to recirculate the
arcoal filters must be fitted in
ilters. See the “Fitting the carbon filters”
ee pages
5 – 16 for
cting each speed and switching the light
ulb on and off.
M
What is
modes?
In extraction mode, the stale air will be taken via the grease filter and
out of the room via external ducting.
In recirculation mode stale air is taken via the grease filter, and passed
through charcoal filters for purificat
k
For optimum performance, we recommend that the cooke
used in extraction mode and connected to external ducting.
Unfortunately if you live in a flat or the hood is too far from an outside
wall,
air.
Do I need a charcoal filter?
All cooker hoods have a grease filter but if you are using your cooker
hood in recirculation mode, then ch
addition to the grease filter.
Completing the installation
If you are setting the appliance to recirculation mode, then you should
now fit the two carbon f
section on pages 13 - 14.
The electrical connection must correspond to the electrical requirement
noted on the rating plate, which is placed inside the cooker hood. The
appliance should now be connected to the electrical supply. S
1
detailed information on the electrical connection.
Refit the grease filter and then switch on the mains supply
to the appliance. Check that the appliance is operating
correctly by sele
b