Baumatic BTW600ME, Руководство пользователя, Страница: 13 / 28

o
You should use a suitable screwdriver to loosen the screws
holding the panel into place. Once this is removed, you will have
access to the bulb.
o
Unscrew the light bulb and insert a new olive shaped bulb with
an E14 coupling 40W (max).
o
IMPORTANT: Defective bulbs should be replaced immediately.
o
If the light still does not work, make sure that the bulb is fitted
properly into the housing before you call for technical assistance.
o
Once the bulb has been replaced, refit the panel by screwing the
screws back into place.
Fitting the carbon filters
If the appliance is going to be used in recirculation mode then it is
necessary to fit carbon filters. This will help to absorb unpleasant
odours caused by cooking.
IMPORTANT: BEFORE ATTEMPTING TO FIT OR
REMOVE THE CARBON FILTERS, YOU MUST
ENSURE THAT YOU HAVE DISCONNECTED THE
COOKER HOOD FROM YOUR MAINS SUPPLY.
o
Remove the filter by locating the two catches at the base of the
filter as shown in the diagram above (1).
13