Baumatic BRU54CW, Руководство пользователя, Страница: 10 / 19

Solid hotplates
• For normal cleaning use a moist cloth.
• For very dirty hotplates use any commercial
cleanser.
• After cleaning, remove any cleanser remaining and
dry the hotplate completely by running the element
for a short period.
• Over time, the hotplates can discolour from spills
during cooking. We recommend to use Hillmark
‘Shine On’ hotplate protector, on a regular basis
to extend the life of the hotplates and reduce the
risk of rusting as this forms a protective waterproof
coating on the hotplates..
• Permanent heat- discolouration of the trim ring is
normal.
Ceramic hotplates
• Remove all spilt food with the razor blade scraper
supplied while the hotplate is still warm / turned off)
– NOT HOT.
• If aluminium foil, plastic items or foods with a high
sugar content melt onto glass, use the razor blade
scraper to remove immediately before the hotplate
has cooled, otherwise pitting of the surface may
occur. High sugar content foods include jam, fruit,
carrots, tomatoes and peas.
• When the ceramic hotplate has cooled, wipe clean
with dishwashing detergent on a damp cloth.
NOTE: Do not use abrasive sponges or scourers,
oven sprays or stain removers on ceramic
hotplates. These may damage, scratch or stain the
ceramic cook top. Any pitting, staining or scratching
will not be covered by warranty.
Safety warnings about cleaning
• Always make sure that the cooker is turned off
before cleaning.
• Always clean cooker immediately after use.
• Use of steam cleaners is prohibited to clean this
applaince.
• Do not use caustic - based cleaners. These will
damage aluminum parts, and remove enamel gloss.
Cleaning the enamel
• Keep enamel clean by wiping it with a soft cloth
dipped in warm soapy water.
• Rub difficult stains with a nylon scourer or creamed
powder cleanser.
• Do not use abrasive cleaners, dry powder cleaners,
steel wool or wax polishes.
• If you use an oven cleaner, then follow the
instructions on the product carefully.
Cleaning the control panel
• Make sure control knobs are in off position.
• Clean the control panel by wiping it with a soft cloth
dipped in warm soapy water and squeezed dry.
• Take care when cleaning around knobs to ensure
printing on control panel is not removed, this can
occur if abrasive cleaners are used, therefore,
should not used at all.
Cleaning the electric cook top
Radiant hotplates
These coiled hotplates are self cleaning. To clean the
trim rings, lift front of element and remove trim ring.
Then wash in warm, soapy water. To clean the spillage
bowl, lift element and pull out of socket. Remove
spillage bowl and wash in warm soapy water
DO NOT PUT ELEMENTS IN WATER!
Fitting oven accessories and cleaning
Refitting the burner crowns and caps
• The burner crown must be fitted correctly into the
burner cup or damage will occur during operation.
• To do this, ensure that the 2 ribs on either side of
the spark plug hole are positioned into the 2 slots
on the burner cup. (See figure 2).
• The burner cap is simply positioned over the top of
the burner crown.
NOTE: When the burner is correctly fitted it will sit
level on the hob.
If ignition is difficult or fails after cleaning, or the
flames are not even around the burner, then either
burner parts are not dry / parts have not been
positioned correctly or incorrect cap is fitted.
Cleaning the grill compartment
• Lift the enamelled grill tray out.
• Clean the sides an bottom of compartment with hot
soapy water.
If stronger action is needed use a non abrasive
cleaner applied with a nylon scourer.
Cleaning the Oven
• Open the door fully.
• Remove oven shelves and side racks.
• Clean in hot soapy water.
• Thoroughly dry with a soft cloth to remove excess
water that may be present.
Cleaning the Gas Hob
Removing the trivets
(Refer Figure 1)
• The trivets locate in the recessed area of the hob.
• They can be removed for cleaning by carefully lifting
them from the hob.
• Clean by washing in warm soapy water. Dry
thoroughly.
• Take care when replacing the trivets as dropping
them onto the hob may damage the enamelled
surface.
Removing the burner parts
(Refer Figure 2)
• The burner caps and crowns are removable for
cleaning.
• Flame port blockage should be removed by means
of a match stick or brush.
• If the caps, crowns and cups are heavily soiled, use
a non-abrasive cleaning compound.
• Do not clean them with abrasive or caustic type
cleaners, or put in a dishwasher as they will be
damaged.
Fitting oven accessories and cleaning
Figure 1
Figure 2
18 Baumatic 540mm Upright Cooker FITTING OVEN ACCESSORIES AND CLEANING Baumatic 540mm Upright Cooker FITTING OVEN ACCESSORIES AND CLEANING 19