Baumatic BO620SS, Инструкция по эксплуатации, Страница: 20 / 36

20
o
To connect the oven power cord, loosen and remove the cover
on the terminal block, in order to gain access to the contacts
inside. Make the connection, securing the cord in place with the
cable clamp provided and then immediately close the terminal
block cover again.
o
If you have to change the oven power cord, the earthing
(yellow/green) conductor must always be 10 mm longer than the
line conductors.
o
Care must be taken to ensure that the temperature of the mains
supply cable does not exceed 50°C.
o
If the mains supply cable is damaged, then it must be replaced
by an appropriate replacement.
Positioning
The adjacent furniture and all materials used in the
installation must be able to withstand a minimum
temperature
of 85°C above the ambient
temperature of the room it is located in, whilst the
appliance is in use.
o
Your appliance is heavy, so you should be careful when moving
or positioning it.
o
Do not try to move the cooker by pulling on either the door,
handle or control panel.
o
The oven may be located in a kitchen, or a bedroom, but not in a
room containing a bath or shower.
The oven must not be
installed in a bedroom of less than 20m³ in size.
o
LPG models must not be installed in a room or internal space
below ground level (e.g. in a basement).
o
This oven may be used for a built-in or built under installation.