Baumatic BO620SS, Инструкция по эксплуатации, Страница: 19 / 36

19
o
IMPORTANT: You should make sure that the door is supported
at all times and that you place the door on some padded
material whilst cleaning it.
o
The oven door and door glass should only be cleaned using a
damp cloth and a small amount of detergent. The cloth
MUST
NOT have come into contact with any form of cleaning product
or chemical previously.
o
To refit the door you should slide the hinges back into their slots
and open the door fully.
o
IMPORTANT: The movable bolts (B) must be closed back into
their original positions before closing the door.
o
Take care not to dislodge the hinge
locking system when removing the door,
as the hinge mechanism has a strong
spring.
o
Do not immerse the door in water at any
time.
Installation
The installation must be carried out by a suitably
qualified person, in accordance with the current
version of the following.
o
UK Regulations and Safety Standards or their European
Norm Replacements.
o
Building Regulations (issued by the Department of the
Environment).
o
Building Standards (issued by the Scottish Development
Department).
o
IEE Wiring Regulations.
o
Electricity At Work Regulations.
o
Gas Safety (Installation and Use) (Amendment)
Regulations.
WARNING: THIS APPLIANCE MUST BE EARTHED.
o
This appliance should be wired into a 13 A double pole switched
fused spur outlet, having 3 mm contact separation and the fuse
rating reduced to 3 amps. This should be placed in an easily
accessible position adjacent to the appliance, preferably above
worktop level. An outlet can then be located at the rear of the
appliance for connection.