Baumatic BMEH93G2I, Инструкция по использованию и установке

Страница: 13 / 40

13
Locking the control unit /
child safety lock By activating the child lock protection you can stop the operation of the appliance, i.e.
the use of hotplates, protecting the children from accidental start and eventual injury.
Activating child lock
• The hob is active.
• Press sensor (B) for at least 2 seconds. Timer’s display showes the symbol
(
┏
o ) steady. Child lock is now activated.
•If hob is turned off by mistake, lock function is active still the next turn on.
Turning child lock off
• Protection is switched off by pressing the sensor (C). Timer’s display showes the
symbol (
┏
o ).
• Press sensor (B) for at least 2 seconds. Child lock is now off.
Remaining heat indicator Glass ceramic hob also features remaining heat indicator “H”. Hotplates are not heated
directly, but through return heat radiating from the dish. As long as the symbol “H” is on
after the hotplate was switched off, the remaining heat may be used for warming up food
or for melting.
Even when the symbol “H” disappears, the hotplate may still be hot.
Be careful of burns!
Extra powerful setting
(hotplates marked “P”) Extra powerful setting may be additionally switched on for fast cooking on indicated
hotplates. This extra hotplate power is used for heating large quantities of food. After
switching on, the extra power is activated for:
• 5 minutes, then automatically switches back on to the maximum normal level 9.
During the time extra power is activated, the power of other hotplates is limited. This is
indicated on the power display by intermittently flashing the selected cooking level and
limited power for a few seconds.
Activating extra powerful setting
• First select the hotplate by touching its relevant sensor (A), and immediately after press
the sensor (D) then press (E) . Extra powerful setting is on, and power indicator displays
symbol “P”.
Premature turning extra powerful setting off
Touch the desired hotplate sensor, and immediately after press the sensor »-« (D).
Letter “P” disappears and the hotplate automatically switches to level 9.
Safety switch off Maximum continuous operation of a particular hotplate is limited, and the duration is
displayed in the above chart. When the hotplate is switched off by the safety mechanism,
the indicator displays symbols “0”, or “H” in case there is any remaining heat left.
In such cases switch the hotplate off by touching the relevant power setting sensor (D).
Power setting 1 2 3 4 5 6 7 8 9
Hours lapse prior safety
switch off
8 6 5 5 4 1,5 1,5 1,5 1,5
Example:
Set the hotplate to power level 5 and leave it operate for some time. If you do not change
the above setting, the safety mechanism will switch the hotplate off after 4 hour.
Protection from overheating
Induction hotplate is also fitted with safety device against overheating which protects
electronic parts from damages. This device operates on several levels. When
temperature of the hotplate excessively rises, it switches on two-stage fan. If this is not
enough, extra powerful heating is deactivated, and finally the safety device either
reduces the heating power of certain hotplates or turns them off completely. When the
hotplate cools off, the full power of hotplate is again available.