background image

 

6

Child Safety 

 

o

 

Baumatic strongly recommend that babies and young children 
are prevented from being near to the appliance and should not 
be allowed to touch the appliance at any time.  

 

o

 

If it is necessary for younger family members to be in the 
kitchen, please ensure that they are kept under close supervision 
at all times. 

 

o

 

Older children should only be allowed to utilise the appliance 
when supervised. 

 
General Safety 
 

 

The appliance should only be installed and connected by a 
suitably qualified person. 

 

 

Care should be taken to ensure that the units and work surfaces 
that you build the appliance into, meet with the relevant 
standards. 

 

 

If you notice any scratches, splits or cracks in the ceramic glass, 
you should immediately switch off the appliance and disconnect 
it from your mains supply. Otherwise there is the risk of electric 
shock occurring. 

 
During use 
 

 

Any film or stickers that are present on the hob surface when it 
is delivered should be removed before use. 

 

 

Care should be taken when utilising the appliance, otherwise 
there is a risk of burns being caused. 

 

o

 

You should not allow the electrical connection cables to come 
into contact with the hob surface when it is hot or any hot 
cookware. 

 

o

 

If fat and oil overheats, then it can ignite extremely quickly. For 
this reason, when cooking with fat and oil the appliance should 
not be left unattended. 

 

 

Make sure that all of the cooking zones are switched off after 
use. 

 
 
 

Содержание BHI300





































Отзывы: