Baumatic BFI40SS, Инструкция по эксплуатации

Страница: 15 / 36

15
Cookware that is suitable for an induction hob
okware that is normally suitable for use on
n induction zone hob:-
Su e
The table below shows co
a
Cookware itabl
Steel, enamelled steel Yes
Cast iron Yes
Stainless steel Yes ( pan
manufacturer)
if stated by the
Aluminium, copper, brass No
Glass, ceramic, porcelain No
o
The bottom of the pans should be as flat and thick as possible.
o
zone hob. This does not mean
that there is an appliance fault.
o
e placed in
the centre of the induction zone that you are using.
rotection against accidental operation of the hob
proximately 10 seconds,
will switch the appliance off automatically.
o
at lasts for
10 seconds and “ER03” will appear on the display.
o
tally placed onto
the control panel, then it should be removed.
o
ill
isplay until the object is removed from the
control panel.
o
ill hot, then the “ER03” code will
alternate with the letter “H”.
o
and
fter 20 seconds the hob will
switch itself off automatically.
o
the
button (1) until you remove the
el.
Certain types of cookware may result in a noise being made
when being used on an induction
IMPORTANT: You should make sure that all pans ar
P
If when the hob is switched on, the electronic control senses a
continuous operation of any hob button for ap
it
If this occurs, then there will be an audible signal th
If a pan or some other object has been acciden
After 10 seconds, the audible signal will cease but “ER03” w
remain on the d
If any of the hob zones are st
If the appliance is switched on using the ON/OFF button (1)
no cooking zone is activated. A
If an object is accidentally placed on the control panel when
hob is not switched on, it will not be possible to switch the
appliance on using the ON/OFF
object from the control pan