BAUMATIC
BFD47SS dishwasher user manual
21
PROBLEM
POSSIBLE CAUSES
WHAT TO DO
Black or grey
marks on dishes!
•
Aluminium utensils
have rubbed against
dishes
•
Use a mild abrasive cleaner to
eliminate those marks by hand.
Water standing in
the bottom of the
tub!
around the outlet on the tub bottom
•
A small amount of clean water
•
This is normal
at the back of the tub keeps the
water seal lubricated. No action
needed.
•
Be careful not to overfill the rinse
aid dispenser.
oversudsing and lead to
•
Spilled rinse aid could cause
•
Overfilled dispenser or
rinse aid has spilled
overflowing.
cloth.
•
Wipe away any spills with a damp
Dishwasher leaks!
•
Dishwasher isn’t level
•
Make sure the dishwasher is level.
•
Make sure if you’re using 3-in-1
tablets that you do not put rinse aid
and salt into the appliance as well.
•
3-in-1 Tablets
attaching appliance to work surface
•
Level appliance & ensure top screws
Door popping
open!
•
Appliance not level
are not lifting the weight of the
dishwasher.
•
Note, the control panel
displays both the
Wrong Reading of
Cycle Time
remaining!
control panel is displaying. Do not
•
Understand what your appliance’s
water temperature and
the time remaining as
the dishwasher runs a
cycle
confuse the water temperature
with the number of minutes
remaining in a wash cycle.
WARNING!
IF OVERFLOW OCCURS, TURN OFF THE MAIN WATER SUPPLY BEFORE CALLING A SERVICE
TECHNICIAN. IF THERE IS WATER IN THE BASE OF THE TANK PAN BECAUSE OF AN OVERFILL
OR SMALL LEAK, THE WATER SHOULD BE REMOVED BEFORE RESTARTING THE DISHWASHER.
21
