BAUMATIC
BFD47SS dishwasher user manual
12
STARTING A WASH CYCLE
1)
MAKE SURE THAT THE PLUG OF THE
APPLIANCE IS INSERTED INTO THE
5) TURN THE KNOB LOCATED ON
WALL SOCKET.
THE RIGHT OF THE CONTROL
PANEL CLOCKWISE UNTIL THE
2)
MAKE SURE THAT THE WATER SUPPLY
DIAL POINTS TO THE SYMBOL
IS TURNED ON TO FULL PRESSURE.
FOR THE CYCLE SETTING.
SEE THE ‘WASH CYCLE TABLE’
3)
LOAD THE DISHWASHER (SEE THE
ON THE NEXT PAGE.
SECTION ENTITLED ‘LOADING YOUR
DISHWASHER’).
6) PRESS THE ON/OFF BUTTON –
THE ON/OFF LIGHT WILL
4)
POUR IN DETERGENT (SEE THE
TURN ON. AT THIS POINT,
SECTION ENTITLED ‘SALT, DETERGENT
THE WASH CYCLE WILL BEGIN.
& RINSE AID’).
* REMEMBER *:
YOU CAN PROGRAM YOUR DISHWASHER UP TO 12 HOURS IN
ADVANCE BY PRESSING THE DELAY BUTTON MULTIPLE TIMES UNTIL THE DESIRED DELAY
HAS BEEN SET. EACH PRESS SETS THE START TIME FORWARD BY 30 MINUTES.
What
ill ee displayed
you w
s
:
Note that when you start a
washing cycle you will see the temperature displayed as well as the number
of minutes the washing cycle has left to run.
•
Digital sign: shows the delayed time, remaining
time and fault codes.
•
Delay sign: shows this when delaying.
•
Washing sign: shows this when washing.
•
Running sign: repeatedly shows this sign in turn
when running. Does not flicker when stopping.
•
Temperature display: displays the wash
temperature at any time.
Approximate Timing of Wash Cycles
Intensive
12
Normal
(strong)
126
mins.
Economy
114
mins.
90
mins.
Rinse Glass
48
mins.
Rapid
51
mins.
40
mins.
Soap
7
mins.
