Baumatic BDWF670SL, Руководство пользователя

Страница: 35 / 44

35
The filter assembly is
not clean or correctly
fitted. This may cause
the spray arm jets to get
blocked also.
Clean or fit the filter assembly
correctly.
Clean the spray arms jets by
following the relevant
instructions.
Cloudiness on
glassware. Combination of soft
water and too much
detergent.
Use less detergent if you have
soft water and select the GLASS
cycle to get them clean.
Black or grey
marks on
dishes. Aluminium utensils have
rubbed against dishes. Use a mild abrasive cleaner to
eliminate those marks.
Detergent is
left in the
dispenser.
Dishes are blocking the
detergent dispenser.
Re-load the dishes properly.
The dishes are
not drying. Improper loading.
Too little rinse-aid was
used.
Dishes are removed too
soon.
Wrong program was
selected.
Use of cutlery with a
low-quality coating.
Load the baskets as suggested in
the relevant instructions.
Increase the amount of rinse-aid
or refill the rinse-aid dispenser.
Do not empty your dishwasher
immediately after washing. Open
the door slightly so that the
steam can escape.
Begin unloading the dishwasher
only once the dishes are barely
warm to the touch.
Empty the lower basket first to
prevent water from dropping off
dishes in the upper basket.
Some programs don’t feature a
drying section. Refer to the
program table to select a more
appropriate program.
Water drainage is more difficult
with these items so cutlery or
dishes of this kind are not
suitable for washing in the
dishwasher.