Baumatic BDW9, Руководство пользователя и инструкция по установке

Страница: 12 / 18

12345678901
12345678901
12345678901
12345678901
12345678901
12345678901
11
GB
Start
After checking the quantities of regeneration salt and of rinse aid, open the water faucet completely,
place the dishes in the baskets, fill detergent into the detergent container and add also detergent for
the pre-wash (if necessary).
Now proceed as follows:
• Use the On/Off button . On the display the words programme selection will appear.
• Use the programme selection button to select the desired programme
• Press the start/pause programme button then close the front door. After a sound signal, which
indicates the initiation of the programme, the appliance will run the wash cycle automatically.
Note: On the display, the duration of the chosen programme will be shown.
Pulling out the upper basket
The upper basket can be pulled out and removed
as shown in the figure.
17
Description of control buttons and
indication lights
LA2505-160
Led Display
1) Indication of delayed start
2) Indication of half load
3) Indication of pre-wash cancel
4) Indication of drying
5) Indication of low salt level
6) Indication of low rinse aid level
Control buttons
7) On/Off
8) Programme selection
9) Delayed start selection
10) Half load selection
11) Pre-wash cancel selection
12) Drying selection
13) Start/Stop/Pause programme
14) Multifunction display
EL0510-010
18
7
14
8
10
13
12
11
6
5
1
2
3
4
9
7 14
8
13
It is advisable not to open the dishwasher during the wash.