26
The water-stop device protects against water damages caused by leaks on the fill
hose which could develop due to natural ageing of the hose.
In the water-stop system the leaking water fills the corrugated hose and activates a
stop valve which cuts off the water supply to the machine.
This fault is shown by a red sector on the window .
Would this occur, please refer to the Customer Care Department.
If the hose is not long enough for correct connection, it must be replaced with a longer
one. The hose can be obtained from the Spares Department.
Safety antitwist device (press and twist to remove the washer).
The Aquastop MUST be installed in an upright position, as shown in the
diagram above.
AQUASTOP-SYSTEM