Baumatic BCG620SS, Инструкция по эксплуатации

Страница: 27 / 40

27
o
To fix the security chains to their anchor brackets: Loosen
the hex nut at the unattached end of the safety chain, until it is
flush with the screw end. Do not remove it completely.
o
Insert the screw head into the top hole of the anchor bracket by
tilting it sideways so that it is at an angle to the top hole when it
is inserted.
o
When the screw head is fully engaged in the bracket, tilt it
upwards so that it is straight, and tighten the hex nut to secure
the end chain link into position.
Electrical connection
YOUR COOKER IS INTENDED FOR FITTED AND
PERMANENT INSTALLATION.
o
Before connecting the appliance, make sure that the supply
voltage marked on the rating plate corresponds with your mains
supply voltage.
o
We recommend that the appliance is connected by a qualified
electrician, who is a member of the N.I.C.E.I.C. and who will
comply with the I.E.E. and local regulations.
o
WARNING: THIS APPLIANCE MUST BE EARTHED.
o
This appliance is supplied with a moulded plug, which must be
connected to an earthed socket.
o
If in future you need to change the fuse in this plug, then a 3
amp ASTA approved (BS 1362) fuse must be used.