Baumatic BCD510SS/W, Инструкция по эксплуатации

Страница: 31 / 36

31
e ith ed inj
the new gas supply according to the table below.
w
(kW)
o
Unscrew th injector and replace it w the requir ector for
Po er Burner type Gas type Pressure
Mbar
Injector
Marking
(1/100 mm) MAX MIN
Natural
gas
20 72 Auxiliary (Small)
Liquid gas 28..30/37 50
1 0.3
Natural
gas
20 97 Semi-rapid 1.75 0.6
(Medium)
Liquid gas 28..30/37 65
Natural 20 115
gas
Rapid (Large)
Liquid gas 28..30/37 85
3 1
o
When all four jets have been replaced, reassemble all the
burner caps are aligned properly.
ge the minimum
flow rate.
f b gas taps.
All work must be carried out by a GASSAFE
the
mini
o
ble screwdriver, turn the screw clockwise to
decrease the flow of gas and make the flame smaller. Turn the
burners carefully, taking particular care to make sure that the
burners and
o
After changing the injectors YOU MUST chan
Minimum low adjustment for ho
registered engineer.
o
Ignite the large (rapid) burner and set the control knob to
mum position.
Remove the control knob to access a small adjusting screw.
o
Using a suita
screw anti-clockwise to increase the flow of gas and make the
flame bigger.