Baumatic BCD1205SS 120cm, Инструкция по эксплуатации

Страница: 36 / 48

36
cable clamp. Connect the mains supply cable to
the terminal block on the cooker using the colour code on the
k the cable terminals for tightness
and ensure that the terminal links are in place, then replace the
nd cover screw.
e
om) or ROI (Republic
of Ireland) Regulations and Safety Standards or
n Norm Replacements.
o
This cooker is supplied to run on natural gas only and cannot
undertaken by a qualified person. For information on the use of
ition of the Gas Safety
(Installation and Use) (Amendment) Regulations and the
ppliance correctly could invalidate
Baumatic’s guarantee and lead to prosecution under the
registered installers are authorised to
undertake the installation and service work, in compliance with
re installed by competent
rsons in accordance with the current edition of the Gas Safety
o
Loosen the cable clamp.
o
Feed the mains connection cable through the grommet in the
back panel and
previous page.
o
Secure the cable clamp. Chec
cover plate a
Gas conn
ction
This appliance must be installed by a competent
person in accordance with the current versions of
the following UK (United Kingd
their Europea
Important information
be used on any other type of gas without modification.
o
Conversion for use on LPG and other gases must only be
other gases, please contact the Baumatic Technical Department.
o
The cooker must be installed by a qualified person, in
accordance with the current ed
relevant building/I.E.E. Regulations.
o
Failure to install the a
regulations quoted above.
o
In the UK, GASSAFE
the above regulations.
Gas Safety (Installation and Use) Regulations
o
It is the law that all gas appliances a
pe
Installation and Use Regulations.
o
It is in your interest and that of safety to ensure compliance with
the law.